The microscope stands 340 mm high when closed. The heavy, cast iron, stand measures 103 mm from the optical axis to arm at stage level, and 132 mm from table to the stage. The fine adjustment is graduated to 0.0025 mm. The microscope is equipped with optical quality polaroid analyzer and polarizer. The stage is 125 mm in diameter with the periphery graduated in degrees, and readable by a vernier to three minutes of arc. The instrument is complete with a gray leatherette covered carrying case with an AO Spencer No. 495 Graduated Attachable Mechanical Stage in a case, and a case for accessories, containing: four compensators (full-wave plate, 1st order red; quartz wedge, I to III order; quarter wave plate; Becke aperture plate), three objectives (2x, 10x, & 43x) mounted on No. 463 objective centering rings (with 2 adjusting wrenches), two standard size cross-hair eyepieces (6x & 10x), and a pinhole eyepiece.
The instrument stands 11.5" high in the closed, vertical position. The base is of cast iron with black crinkle finish, some of which has come off to expose the iron below the mirror rail. The scale and readout arms are of steel. All of the control knobs and the alidade handle are in heavy chrome plating. The solid metal two sided mirror is mounted on an adjustable dovetail slide. The scale is engraved on an inlaid German silver strip with scale divisions to the thousands place (nD 1,300–1,710), and numbered to the hundreds place. The number: 788432618 is engraved on the scale just past 1710. The readout is viewed with an adjustable triplet magnifier. A hairline engraved on a glass window affixed via a threaded retaining ring to the prism alidade determines the index. The prism alidade has a tangent screw fine adjustment. The refractometer telescope is heavy black enameled brass, with the AO shield logo engraved and white filled on the arm over Spencer and the serial number: 2009. The Amici color compensating prism scale is finished in brushed chrome with black filled engraved divisions (0–60–0) and adjusted with a knurled wheel. The prism holder is finished in brushed chrome with polished chrome tubulatures for connecting to a circulating bath for temperature control. There is a chromed brass thermometer shield and mercury-filled thermometer. Engraved: HSU 43923.
The instrument has its original black leatherette covered hardwood case and its original glass block refractive index standard in a small plastic vial (shown in the photo).
The instrument stands 11 1/2" high in the closed, vertical position. The round, cast iron base is 5 1/2" diameter. The curved edge of the base is black japanned, while the top is finished in a fine black crinkle enamel. The post is heavy cast iron, finished in crinkle enamel, and bolted to the base from below with three heavy screws. There is a small (1/2" x 11/16") plaque attached to the base with four screws with the Carl Zeiss Jena "lens" logo with Germany written beneath. The logo is also engraved and black-filled on the telescope arm, along with the serial number: Nr.15645. The inlaid nickel silver scale has black-filled graduations to the thousands place, with numbering to the hundreds-place. The tenths-place is also numbered, with larger numerals (1,X) at the even-numbers, and is carried on a black japanned iron (or steel) arm. The alidade is black crinkle finished brass. The telescope, telescope arm and other furniture are nickel plated, while the prism holder/heating block has a flat black oxidized coating. There is a small, square, watch-key type shaft for adjusting the Amici prisms in the side of the telescope. The original thermometer holder has been replaced with a custom brass adaptor to fit rubber stoppers. The instrument is engraved on the telescope arm: HSC 5374.
The instrument is in its original light hardwood ("alderwood") case (8 1/4 x 6 3/4 x 14" h), with a black painted iron carry-handle and nickel plated keyhole cover.