The instrument is constructed of black painted wood. The base has a quarter-round bead on the top edge and is 6 5/8 x 5 3/8 x 3/4". It sits on four small rubber feet. An upright, 12 7/8"t x 3 3/8"w, is attached with its front face centered on the base. A 13-0-13cm scale, etched into a mirror, is held with small brackets onto a wooden slide on the left side of the upright. An open ended manometer tube loops around the scale and then down to a stopcock which is in turn connected to a "T" running along the bottom of the upright. The manometer tuber is held in place with six small trefoil pattern-end, nickel plated brass straps attached with miniature screws. A nickel plated brass manufacturer's tag with raised polished letters against a black background is pinned in the center front of the base. The legend is as follows: TRADE PANTEC MARK/ PANTECHNICAL MFG. CO. / BERKELEY -CALIFORNIA. There is an oval brass tag, stamped HUMBOLDT S-T-C / 2108, attached to the top of the wooden stand with two brass pins. The instrument is in fine condition noting that the mirror is in need of resilvering, the wood shows through the paint on some edges and there is a break, repaired with rubber tubing in the manometer tube between the stopcock and the "T".
The catalog description is for a similar instrument sold by the Braun Corporation in 1934.
The instrument is comprised of a one meter+ column supported on a cast iron (black crinkle finished) tripod, with tapering sigmoidal legs. There is a chrome plated leveling screw on the end of each leg. The column is made from a nickel plated brass hollow square (1.9 cm) tube, 107 cm tall, with a 100 cm scale (graduated to 1 mm, and numbered at 10 cm intervals) etched onto one side. Three cast brass (black krinkle finished), riders move along the column: 1) a beaker platform, with screw operated fine position control moving the platform relative to a clamping collar; 2) a collar constraining the captured double hook bob; and 3) the spring suspension hook with vernier scale and screw operated fine position control relative to a clamping collar. All clamping and adjusting screws are chrome or nickel plated. The beaker platform shows the remains of a BKH decal within the recessed area on top. The double hook bob has a ring inscribed into the body about 2/3 the way along the body. There is an oval brass tag stamped HUMBOLDT S-T-C / 2097 attached with brass pins to the right side of one of the tripod legs.
The spring ("7580 spring heavy") and aluminum and glass pans ("7568 scale pan Upper") are replacements (Cenco, c. 1960).